Imaging material properties of biological samples with a Force Feedback Microscope

Mechanical properties of biological samples have been imaged with a \textit{Force Feedback Microscope}. Force, force gradient and dissipation are measured simultaneously and quantitatively, merely knowing the AFM cantilever spring constant. Our first results demonstrate that this robust method provides quantitative high resolution force measurements of the interaction The little oscillation imposed to the cantilever and the small value of its stiffness result in a vibrational energy much smaller than the thermal energy, reducing the interaction with the sample to a minimum. We show that the observed mechanical properties of the sample depend on the force applied by the tip and consequently on the sample indentation. Moreover, the frequency of the excitation imposed to the cantilever can be chosen arbitrarily, opening the way to frequency-dependent studies in biomechanics, sort of spectroscopic AFM investigations

Out of equilibrium anomalous elastic response of a water nano-meniscus

We report the observation of a transition in the dynamical properties of water nano-menicus which dramatically change when probed at different time scales. Using a AFM mode that we name Force Feedback Microscopy, we observe this change in the simultaneous measurements, at different frequencies, of the stiffness G'(N/m), the dissipative coefficient G''(kg/sec) together with the static force. At low frequency we observe a negative stiffness as expected for capillary forces. As the measuring time approaches the microsecond, the dynamic response exhibits a transition toward a very large positive stiffness. When evaporation and condensation gradually lose efficiency, the contact line progressively becomes immobile. This transition is essentially controlled by variations of Laplace pressure

On the Angular Dependence of InP High Electron Mobility Transistors for Cryogenic Low Noise Amplifiers in a Magnetic Field

The InGaAs-InAlAs-InP high electron mobility transistor (InP HEMT) is the preferred active device used in a cryogenic low noise amplifier (LNA) for sensitive detection of microwave signals. We observed that an InP HEMT 0.3-14GHz LNA at 2K, where the in-going transistors were oriented perpendicular to a magnetic field, heavily degraded in gain and average noise temperature already up to 1.5T. Dc measurements for InP HEMTs at 2K revealed a strong reduction in the transistor output current as a function of static magnetic field up to 14T. In contrast, the current reduction was insignificant when the InP HEMT was oriented parallel to the magnetic field. Given the transistor layout with large gate width/gate length ratio, the results suggest a strong geometrical magnetoresistance effect occurring in the InP HEMT. This was confirmed in the angular dependence of the transistor output current with respect to the magnetic field. Key device parameters such as transconductance and on-resistance were significantly affected at small angles and magnetic fields. The strong angular dependence of the InP HEMT output current in a magnetic field has important implications for the alignment of cryogenic LNAs in microwave detection experiments involving magnetic fields

Resource allocation model for sensor clouds under the sensing as a service paradigm

The Sensing as a Service is emerging as a new Internet of Things (IoT) business model for sensors and data sharing in the cloud. Under this paradigm, a resource allocation model for the assignment of both sensors and cloud resources to clients/applications is proposed. This model, contrarily to previous approaches, is adequate for emerging IoT Sensing as a Service business models supporting multi-sensing applications and mashups of Things in the cloud. A heuristic algorithm is also proposed having this model as a basis. Results show that the approach is able to incorporate strategies that lead to the allocation of fewer devices, while selecting the most adequate ones for application needs.FCT (Foundation for Science and Technology) from Portugal within CEOT (Center for Electronic, Optoelectronic and Telecommunications) UID/MULTI/00631/2019info:eu-repo/semantics/publishedVersio

Internet protocol over wireless sensor networks, from myth to reality

Internet Protocol (IP) is a standard network layer protocol of the Internet architecture, allowing communication among heterogeneous networks. For a given network to be accessible from the Internet it must have a router that complies with this protocol. Wireless sensor networks have many smart sensing nodes with computational, communication and sensing capabilities. Such smart sensors cooperate to gather relevant data and present it to the user. The connection of sensor networks and the Internet has been realized using gateway or proxy- based approaches. Historically, several routing protocols were specifically created, discarding IP. However, recent research, prototypes and even implementation tools show that it is possible to combine the advantages of IP access with sensor networks challenges, with a major contribution from the 6LoWPAN Working Group. This paper presents the advantages and challenges of IP on sensor networks, surveys the state-of-art with some implementation examples, and points further research topics in this area